HO and 1/32 Slot Car Track Lane Marking Tape and Finish Line Tape
HO and 1/32 Slot Car Track Lane Marking Tape and Finish Line Tape
FAQs
Q. How much is shipping if I live outside the U.S.A.?
A. For 4 Packs it shipping is $6, For 8 Packs it is $8. Place the order as normal and you will be
billed seperatly for the shipping.
Q. How is Track Tape applied to my track?
A. On a straight section, anchor the start of the tape firmly. Next, extend the roll about a foot at a time. Lay the tape
down so that it is just outside the slot of the track. When the tape is lined up correctly, firmly press the tape to the
track. NOTE: This tape is flexible. DO NOT STRETCH THE TAPE as you press it firmly to the track.
On a curved section, as you enter the curve firmly press the tape to the track. Now, pull a small section of tape
and guide it around the curve. The amount you apply at one time will depend on the radius of the curve. The tighter
the radius, the shorter amount of tape you will be able to apply at one time. DO NOT STRETCH THE TAPE! Once
the tape is down, go back and firmly apply it with your thumb.
Q. How is the Finish Line Tape applied to my track?
A. Peal the backing and lay the Finish Line Tape across the track. Use and Exacto knife to cut on either side of the
rails and slots. Peal away those cut out sections and press the remaining tape firmly to the track.
Q. How long will the tape last?
A. When applied correctly your track tape will last several years. Our original tape has been on our track since the first
time we applied it.
Q. How much is shipping if I live outside the U.S.A.?
A. For 4 Packs it shipping is $6, For 8 Packs it is $8. Place the order as normal and you will be
billed seperatly for the shipping.
Q. How is Track Tape applied to my track?
A. On a straight section, anchor the start of the tape firmly. Next, extend the roll about a foot at a time. Lay the tape
down so that it is just outside the slot of the track. When the tape is lined up correctly, firmly press the tape to the
track. NOTE: This tape is flexible. DO NOT STRETCH THE TAPE as you press it firmly to the track.
On a curved section, as you enter the curve firmly press the tape to the track. Now, pull a small section of tape
and guide it around the curve. The amount you apply at one time will depend on the radius of the curve. The tighter
the radius, the shorter amount of tape you will be able to apply at one time. DO NOT STRETCH THE TAPE! Once
the tape is down, go back and firmly apply it with your thumb.
Q. How is the Finish Line Tape applied to my track?
A. Peal the backing and lay the Finish Line Tape across the track. Use and Exacto knife to cut on either side of the
rails and slots. Peal away those cut out sections and press the remaining tape firmly to the track.
Q. How long will the tape last?
A. When applied correctly your track tape will last several years. Our original tape has been on our track since the first
time we applied it.
Testimonials
"Thanks so much for this tape product! Exactly what we needed!!"
Jason - TN
"The installation was simple and my track looks fantastic! Thanks a bunch!
Robert - NY
"Very cool product, lookk great and was easy to put on...also thanks for the Finish Line Tape..extra cool!
Steven - OH
"Racing is so much better now that we can place our cars back on quickly...good job!
Ryan - CA
And there are many....many...more like this!
Jason - TN
"The installation was simple and my track looks fantastic! Thanks a bunch!
Robert - NY
"Very cool product, lookk great and was easy to put on...also thanks for the Finish Line Tape..extra cool!
Steven - OH
"Racing is so much better now that we can place our cars back on quickly...good job!
Ryan - CA
And there are many....many...more like this!
